Can't update OTA in Z2M

[fryc88]

Hi,
I'm looking for advice how to update it OTA through Z2M.
I have tried their repo and it shows me no update available. I have tried adding file to local folder as in the past and it still shows me no update available, even if i add 'force' line.
Any clues guys?

And i want to update it to 3001-1100 so i have added file and pointed it in ota json:

And all i've got is no update available

[sendorm]

I was on the same train and was able to update like this:
put this file under ota folder: 1141-0203-11003001-z03mmc.zigbee
create a my_index.json file under the same place as your configuration.yaml with content:

[
  {
    "url": "ota/1141-0203-11003001-z03mmc.zigbee",
    "force": true
  }
]

in your configuration.yaml file add this:

ota:
  zigbee_ota_override_index_location: my_index.json

after this restart zigbee and check for update. it found the update and updated successfully afterwards.

[fryc88]

I have tried it again, i had very similar way to yours but it did not change anything unfortunately :(

[fryc88]

Just looked into log but it is not showing if it is looking for file or anything else, just got info about current and latest versions being same

[06-06-2025 19:40:34] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/kitchen_xiaomi', payload '{"battery":83.5,"comfort_humidity_max":null,"comfort_humidity_min":null,"comfort_temperature_max":null,"comfort_temperature_min":null,"enable_display":null,"humidity":59.19,"humidity_calibration":null,"last_seen":"2025-06-06T19:40:34+01:00","linkquality":255,"show_smiley":null,"temperature":19.54,"temperature_calibration":null,"temperature_display_mode":"fahrenheit","update":{"installed_version":285224961,"latest_version":285224961,"state":"idle"},"update_available":false,"voltage":2400}'

[sendorm]

I had the same problem. I had two devices one was on 1.1.0 and one was on 1.0.6 and both were showing no update available. that's why I tried this method and was able to update the older one. I am on zigbee2mqtt 2.4.0 maybe that might be a difference. what version is yours is on currently? Also don't forget to restart zigbee2mqtt after the changes (you probably did but better to check)