Set up for my ST7796S Display

[FrankVanris2]

Hi I'm wondering why I am getting these issues:

#error "CONFIG: Need to enable a supported DRV_DISP_ADAGFX_* option in GUIslice config"

.pio\libdeps\uno_r4_wifi\GUIslice\src\GUIslice_drv_tft_espi.cpp:73:12: fatal error: XPT2046_Touchscreen.h: No such file or directory

I thought I did my setup correctly in the Gui_Config file but I guess not. Here is what I had when it came to driver setups:

  #define DRV_DISP_ADAGFX           // Adafruit-GFX library
  #define DRV_DISP_TFT_ESPI   // Adafruit ST7796
  #define DRV_TOUCH_XPT2046_PS      // PaulStoffregen/XPT2046_Touchscreen

I'm using the TFT_eSPI library to project what I wanted to see on my ST7796S display. The Microcontroller that I am using is an Arduino Uno Rev 4 with Wifi.

I also had another question, after I complete the config and testings for the config. Do I need to install the GUIslice Builder afterwards?

[Pconti31]

@FrankVanris2 You don't mention your config file.
You should be using esp-tftespi-default-xpt2046.h
This should set your #defines correctly. In particular

#define DRV_DISP_ADAGFX           // Adafruit-GFX library

Should NOT be used. As for your other error did you download PaulStoffregen/XPT2046_Touchscreen and install inside Arduino/libraries?
I think thats why you get fatal error: XPT2046_Touchscreen.h: No such file

As for the Builder, you can install it anytime you want after having installed Arduino IDE.

Paul--